Whether your decals have been up for years or just applied, here’s an easy guide to help you remove and reposition them. Initially, gather your supplies to remove stickers. Like a hairdryer, plastic scraper, mild soap, water, cloth, and optional rubbing alcohol.
Warm the sticker with a hairdryer on low heat to soften the adhesive. Lift one edge with your fingers or a scraper and slowly peel it off, applying more heat if needed. Clean the wall with soapy water and a cloth to remove any residue; use rubbing alcohol for stubborn spots.
To reuse the sticker, lay it flat with the adhesive side up and apply a repositionable adhesive spray if necessary. Finally, place the sticker in the desired spot and smooth it out to remove air bubbles. By following these steps, you can easily remove and reposition your wall stickers.
Factors Affecting Sticker Removal
Before you start, consider these factors which affect how easily stickers can be removed:
Wall Texture:
Stickers on slightly textured walls are easier to remove compared to those on completely smooth surfaces. The slight texture allows for a bit of air to get between the wall and the sticker, making it easier to peel off. On the other hand, stickers on completely smooth surfaces adhere more firmly, requiring more effort to remove.
Wall Paint:
The type and age of the wall paint play a significant role in sticker removal. Older walls with many layers of hardened paint, especially semi-gloss or glossy finishes, are better for stickers. These surfaces are more durable and less likely to peel when stickers are removed. In contrast, newly painted walls or those with matte or silky finishes are more susceptible to damage during sticker removal.
Duration:
The length of time a sticker has been attached to the wall affects its removability. Over time, the adhesive on the sticker hardens, making it more difficult to remove. Stickers that have been on the wall for years can be trickier to peel off compared to those that have been recently applied. The adhesive bonds more strongly to the surface over time, requiring more effort and care during removal.
Step-by-Step Sticker Removal Process
1. Gently Peel Stickers Away
For small and basic stickers, gently peeling them away is often sufficient:
Loosen a Corner: Start by carefully loosening a corner of the sticker with your fingernail. Be gentle to avoid scratching the wall surface.
Peel Slowly: Slowly peel the sticker off, pulling it perpendicular to the wall. This technique helps prevent the paint from coming off with the sticker.
Try Different Corners: If the sticker resists peeling, try starting from another corner. Continue to peel slowly to minimize any potential damage to the wall.
2. Use Heat to Soften Adhesive
Heat can make the adhesive more pliable, making sticker removal easier:
Choose the Right Tool: Use a hairdryer or heat gun set to a low to medium heat setting. Apply Heat: Hold the device 4-5 inches away from the sticker. Apply heat for a couple of minutes to warm and soften the adhesive.
Peel Carefully: Once the adhesive is warm and pliable, gently peel the sticker away. This method helps prevent damage to the wall and makes the removal process smoother.
3 Wet & Wipe
Moisture can help in some cases, but be cautious as it may damage certain wall surfaces:
Prepare the Solution: Mix hot water and dishwashing liquid or a solution of two parts water to one part liquid fabric softener.
Test a Small Area: Before applying the mixture, test it on a small, inconspicuous area of the wall to ensure it doesn’t cause damage.
Apply and Peel: Dab the mixture onto the sticker using a sponge or cloth. Let it sit for a moment, then gently peel the sticker off. This method helps loosen the adhesive, making it easier to remove the sticker without damaging the wall.
4. Try an Adhesive Cleaner
Adhesive cleaners like WD-40 can be very effective:
Apply the Cleaner: Spray WD-40 directly onto the sticker, ensuring that you cover the edges well. Let it sit for 5-7 minutes to allow the cleaner to penetrate and loosen the adhesive.
Gently Scrub: Use a soft sponge or your fingers to gently scrub the sticker. The adhesive should begin to break down, making it easier to peel away.
Repeat if Needed: If any adhesive remains, spray WD-40 again and let it sit for a few more minutes. Continue to scrub gently until the sticker and all adhesive residue are completely removed.
5. Apply a Residue Remover
If residue remains after sticker removal:
Choose a Remover: Use a citrus-based adhesive remover, which is effective and gentle on most wall surfaces.
Apply the Remover: Apply the adhesive remover to the residue using a cotton swab. Ensure you cover the entire area with residue.
Let it Sit: Allow the remover to sit for a few minutes to break down the adhesive.
Clean the Area: Wipe the area clean with a damp paper towel to remove any greasy residue left by the remover. This step ensures your wall is left clean and free of any sticky remains.
Repositioning and Reusing Wall Decals
Apply a Residue Remover
If residue remains after sticker removal:
Choose a Remover: Use a citrus-based adhesive remover. It’s effective and gentle on most wall surfaces.
Apply the Remover: Apply the adhesive remover to the residue using a cotton swab. Ensure you cover the entire area with residue.
Let it Sit: Allow the remover to sit for a few minutes to break down the adhesive.
Clean the Area: Wipe the area clean with a damp paper towel to remove any greasy residue left by the remover. This step ensures your wall is left clean and free of any sticky remains.
Reattaching Decals
Soften the Adhesive: Use a hairdryer to soften the adhesive on the decal before moving it to another surface. This makes the decal more pliable and helps it stick better.
Prepare the Surface: Ensure the new surface is clean and free of dust. A clean surface improves adhesion and ensures the decal stays in place.
Additional Tips
Vinegar and Olive Oil:
Vinegar can dissolve adhesives but should only be used on non-porous surfaces like glazed tile or sealed paneling. Olive oil might help remove adhesives, but it can stain, so always test it on an inconspicuous area first.
Patience and Care:
Taking your time and using the right tools and methods will help you avoid damaging the paint or leaving sticky residues. Always be gentle and patient for the best results.
Conclusion
Removing stickers from walls doesn’t have to be a stressful task. By understanding what affects removal and using the right techniques, you can keep your walls in good condition. Whether you’re moving, redecorating, or just updating your space, these tips will help you handle sticker removal like a pro.
